New! Read a white paper about rubber vs. polyurethane skirting.
Polyurethane Belt Skirting
- KS01 skirting is designed to provide solutions for sealing belts in environments from wet clay to frozen coal
- Extremely resilient, outlasting rubber and UHMW polyethylene
- Available in 4", 5", 6", 8", 9", 10" and 12" widths with thicknesses ranging from 3/8" to 2", and lengths up to 50'
- Available with straight or 35° beveled edges
- 8-to-10 times the wear life over quality rubber skirting
- MSHA-accepted, flame-retardant formulas available
- Read testimonials of others who've used our skirting.
Downloads
|
Wedge-Loc™ Skirting System
- Maintenance-friendly design installs quickly and easily by either welding or bolting into place
- Quickest adjustment of any skirting system in the industry
- Wedge-Loc clamps and skirting are sold separately
- Sold in individual 6" segments, allowing you to customize your installation
- Installs with angle iron, flat iron or rebar
- Accepts skirting thicknesses from 3/8" to 1"
Downloads
|
|
Snap-Loc™ Dust Seal
- Straight-forward, simple solution to dust containment and control
- Maintenance-friendly design installs quickly and easily
- It applies downward pressure onto belt's surface to create a tight seal
- Continues to self-adjust throughout the life of the dust seal, so there is no need for manual adjustment
- Reduces drag on conveyor system, up to 60% less than rubber seals
- Available in continuous lengths up to 60'
- Use with Snap-Loc rail (sold separately)
- MSHA-accepted, flame-retardant formulas available
- Tear-resistant
Downloads
|
Fold-n-Seal™ Skirting
- Fits into most other clamping systems
- Use with Wedge-Loc clamping system (sold separately)
- Two-part skirt featuring a ¾" primary seal combined with a flexible secondary seal to keep material and dust contained on belt
- Available in Front Line™ flame-retardant urethane which is MSHA approved for underground mine use
Downloads
|
|
AccuFlo™ Retrofit DCI Skirting
- Direct replacement for DCI Pos-a-Seal system
- Reduces drag up to 60% over rubber seals
- Available in continuous lengths up to 50'
- MSHA-accepted, flame-retardant formulas available
- Tear-resistant
Downloads
|
Load Zone™ Containment Skirting
- Designed to contain material at transfer points
- Straight or 20° beveled edge
- Available in 60" and 96" lengths
- Varying heights and thicknesses available
Downloads
|
Argonics Conveyor Belt Skirting Systems are protected by one or more of the following patents: 6,547,062; 7,484,617.
