Argonics Products

The XTC is one powerful reversing conveyor cleaner. The system can handle wet, dry, sticky or slimy conditions. The unique Web Torque™ tensioner has enough give for mechanical splices and the flow-over blade design reduces material build-up. The XTC is designed with the same toughness and durability as our standard…

Argonics’ wrap-around polyurethane blade liners bolt onto mixer blades to protect them and prevent concrete build-up. They wrap around the blade edges to stop concrete from migrating underneath, eliminating the need for steel edge protection. These blade liners are made of the same Kryptane® material as the Evolution drum liner,…

Wedge-Loc is designed to be easy to install and adjust. Simply stitch weld or bolt into place, install your skirting, drop it to the belt, then knock the wedges to lock it down. Use Wedge-Loc to replace your old busted or worn-out clamping systems and install your choice of skirting:…

Wear indicator is available on all sheets 1/2″ thick or thicker. The 1/4″ thick contrasting color wear indicator allows you to quickly identify when it is time to replace them.

Argonics’ polyurethane Valve Box Cover lasts significantly longer than steel covers and provides a tight, rattle-free seal. It keeps out dirt and debris, prevents valve box wear, and eliminates that noisy “clanking” (reducing 100% of rattling noise). The cover fits snugly so it won’t pop out, yet remains pliable enough…

Keep rocks, fines, clumps and other debris off your belt and away from your tail pulley with the Argonics V-Max™ V-Plow. The plow is equipped with our best Kryptane® urethane side blades and an angled front nose plow. The V-Max has a chrome-silicon spring tensioning system for extremely dirty environments…

The XTC with a tungsten carbide blade is one powerful reversing conveyor cleaner. The system can handle wet, dry, sticky or slimy conditions. The unique Web Torque™ tensioner has enough give for mechanical splices and the flow-over blade design reduces material build-up. The XTC is designed with the same toughness…

The Super-G’s unique “pass-through” mainframe design allows material to freely fall through it, keeping your systems online with little to no maintenance. This system is based on the same heavy duty mainframe and Perma-Torque tensioner as our Eraser system. The urethane cartridge holds the 6” tungsten-tipped blades, which allows the…

The tungsten Super-G XL is a longer version of the tungsten Super-G, available in lengths of 72", 84" and 96". The Super-G XL is built on a .25" thick, 3.5" box steel mainframe, similar to the Super Eraser. Pins in the center allow it to hold two of our tungsten-tipped…

The Eraser DS with tungsten carbide blade is an economical version of our XTC cleaner, with a .19” thick (5 mm), 2” x 2” (51 mm x 51 mm) powder-coated tube stock steel mainframe for strength and durability. It is specifically designed for reversing conveyor belt applications. The DS uses…